Skip to content
Netzspec
DE
Comparison

Catalyst 2960-X vs Catalyst 9200the successor compared

The Cisco Catalyst 2960-X series is end-of-life; the Cisco successor is the Cisco Catalyst 9200. Below is the datasheet-verified spec comparison.

SpecWS-C2960X-48FPD-LCatalyst 2960-X · End-of-LifeC9200-24PCatalyst 9200 · current
Switch-TypManagedManaged
LayerL2L3
Portanzahl5024
Port-Konfiguration48× 1G-RJ45 (PoE+) + 2× 10G-SFP+24× Gigabit-RJ45 (PoE+, 30 W)
Port-Geschwindigkeit1G (Uplink 10G)1 GbE
Uplink-Ports2× 10G-SFP+Modulare Uplinks (C9200-NM-Modul: 4×1G / 4×10G / 2×25G / 2×40G)
PoEJa – PoE+ (802.3af/at), 740 W (Perpetual PoE)Ja (PoE+ 802.3at, 30 W/Port, Budget 370 W mit Primärnetzteil, mit 2. Netzteil erweiterbar)
Switching-Kapazität136 Gbit/s128 Gbit/s
Durchsatz130,9 Mpps95,23 Mpps
Bauform19-Zoll-Rackmontage (1 HE)19-Zoll-Rackmontage (1 HE)
StromversorgungInternes Netzteil (100–240 V AC); externe Redundanz über Cisco RPS 2300Modulares Netzteil (600 W AC), 2. Netzteil für Redundanz optional
KühlungAktiv (temperaturgeregelte Lüfter)Dual-Lüfter, FRU-austauschbar (N+1-Redundanz)
StackingJa – FlexStack-Plus (optional, bis zu 8 Einheiten, 80 Gbit/s)Ja (StackWise-160, 160 Gbit/s, bis 8 Einheiten)
Betriebstemperatur-5 bis 45 °C-5 bis 45 °C
AnwendungEnterprise-/Campus-Zugang (Layer-2-Access (LAN Base)); PoE+-Versorgung für IP-Telefone, WLAN-Access-Points und Kameras; per FlexStack-Plus bis 8 Einheiten stapelbar; verwaltet über Cisco IOS (CLI) und Web-UI, perpetual lizenziertKosteneffizienter Enterprise- und Zweigstellen-Access-Layer, Cisco-SD-Access-Einstieg und Wi-Fi-6-AP-Anbindung
ZustandNeu, versiegeltNeu, versiegelt

FAQ

What is the successor to the Catalyst 2960-X?

Cisco names the Cisco Catalyst 9200 series as the successor to the end-of-life Cisco Catalyst 2960-X series.

Is it worth moving from Catalyst 2960-X to Catalyst 9200?

The Catalyst 2960-X series is end-of-life (no hardware support). The Catalyst 9200 offers current, supported hardware. The spec differences are in the table above.