Comparison
Cisco 2960SF Switches vs Catalyst 9200 — the successor compared
The Cisco 2960SF Switches series is end-of-life; the Cisco successor is the Cisco Catalyst 9200. Below is the datasheet-verified spec comparison.
| Spec | WS-C2960S-F48FPS-LCisco 2960SF Switches · End-of-Life | C9200-24PCatalyst 9200 · current |
|---|---|---|
| Switch-Typ | Managed | Managed |
| Layer | L2 | L3 |
| Portanzahl | 52 | 24 |
| Port-Konfiguration | 48× FE-RJ45 (PoE+) + 4× 1G-SFP | 24× Gigabit-RJ45 (PoE+, 30 W) |
| Port-Geschwindigkeit | 100M (Uplink 1G) | 1 GbE |
| PoE | Ja – PoE+ (802.3af/at), 740 W (bis 30 W/Port) | Ja (PoE+ 802.3at, 30 W/Port, Budget 370 W mit Primärnetzteil, mit 2. Netzteil erweiterbar) |
| Switching-Kapazität | 16 Gbit/s | 128 Gbit/s |
| Durchsatz | 13,1 Mpps | 95,23 Mpps |
| Bauform | 19-Zoll-Rackmontage (1 HE) | 19-Zoll-Rackmontage (1 HE) |
| Stromversorgung | Internes Netzteil (100–240 V AC) | Modulares Netzteil (600 W AC), 2. Netzteil für Redundanz optional |
| Kühlung | Aktiv (temperaturgeregelte Lüfter) | Dual-Lüfter, FRU-austauschbar (N+1-Redundanz) |
| Stacking | Ja – FlexStack (optional, bis zu 4 Einheiten, 20 Gbit/s) | Ja (StackWise-160, 160 Gbit/s, bis 8 Einheiten) |
| Betriebstemperatur | -5 bis 45 °C | -5 bis 45 °C |
| Anwendung | Enterprise-/Campus-Zugang (Layer-2-Access (LAN Base), Fast-Ethernet 10/100); PoE+-Versorgung für IP-Telefone, WLAN-Access-Points und Kameras; per Cisco FlexStack bis 4 Einheiten stapelbar; verwaltet über Cisco IOS (CLI) und Web-UI; Original-Ersatz-Hardware für bestehende 10/100-Standorte | Kosteneffizienter Enterprise- und Zweigstellen-Access-Layer, Cisco-SD-Access-Einstieg und Wi-Fi-6-AP-Anbindung |
| Zustand | Neu, versiegelt | Neu, versiegelt |
| Uplink-Ports | — | Modulare Uplinks (C9200-NM-Modul: 4×1G / 4×10G / 2×25G / 2×40G) |
FAQ
What is the successor to the Cisco 2960SF Switches?
Cisco names the Cisco Catalyst 9200 series as the successor to the end-of-life Cisco 2960SF Switches series.
Is it worth moving from Cisco 2960SF Switches to Catalyst 9200?
The Cisco 2960SF Switches series is end-of-life (no hardware support). The Catalyst 9200 offers current, supported hardware. The spec differences are in the table above.